Since the carrier contains propane / butane, it should be applied with the POWER OFF with all safety precautions taken when working with electrical equipment.

Yes. However, NanoProtech does not provide permanent protection against electrolysis. Components, such as paper capacitors, speakers and microphones with paper membranes should be isolated. The product can function for up to 72 hours continuous immersion under fresh water.

NanoProtech is ideal for lubrication of moving parts and mechanisms.

NanoProtech has long term protection from sea water sprays, acids and chemical reagents. The effect can be increased by repeated coatings. It does not provide protection against immersion under sea water.

NanoProtech is flammable in aerosol containers, as it contains a propellants such as propane / butane. 15 minutes after application, the coating dries to a non-flammable film.

Yes. NanoProtech does not contain hazardous substances. It can be harmful to aquatic animals.

No adverse effects and does not destroy metals, plastics, rubber, glass, paints, ceramics, electric motors.

It all depends on the application. On average, the protection lasts for one to three years if there is no mechanical friction on the treated surface.

In processing electronic devices (phone, laptop, radio, radio, television, concert equipment, etc.) take care to isolate components, such as paper capacitors, speakers and microphones with paper membranes. It is intended for accidental exposure to water and not for immersion!

Yes, because the addition of high quality oils does not allow the paint and varnish layer to dry.